Search

… is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed … 130 - 240 492 - 908 4,000 - 5,000 psi 276 - 345 Bar GVP 07 15 - 25 57 - 95 2,500 - 3,650 psi 172 - 252 Bar GVP 15 25 - … 4,500 - 5,500 psi 275 - 380 BarGCP 610 60 - 120 227 - 454 Jaw Open and Close Function The hydraulic requirements for …

… is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed … 130 - 240 492 - 908 4,000 - 5,000 psi 276 - 345 Bar GVP 07 15 - 25 57 - 95 2,500 - 3,650 psi 172 - 252 Bar GVP 15 25 - … 4,500 - 5,500 psi 275 - 380 BarGCP 610 60 - 120 227 - 454 Jaw Open and Close Function The hydraulic requirements for …

… (GXP) FEATURES 2 3 4 5 6 7 1 1 2 3 5 6 7 4 Model Weight* Jaw Opening Jaw Depth Reach** Minimum Excavator Wt. (lbs.) … 660 MAXX 13,700 32 32 10' 0" 60,000 100,000 GXP 660R MAXX 15,500 32 32 13' 6" 75,000 120,000 GXP 700 13,800 35 35 10' … warranty. Genesis reserves the right to continually make product improvements designed to positively enhance …

… 4 4 5 5 *Weight includes mounting bracket and stiff arm. **Jaw opening varies slightly depending on excavator mounting … warranty. Genesis reserves the right to continually make product improvements designed to positively enhance … 131 12 34 50 85,000 - 120,000 GSD 140 7,500 6.5 - 7.5 140 15 34 50 120,000 - 170,000 GSD 170 9,600 7.5 - 10.0 150 16 40 …

… and maintenance personnel. 7 6 9 14 12 19 2 13 11 10 15 17 18 3 1 4 5 8 13 16 3 1 Slewing ring – connects the … the end cap, tie rod and tie rod nut 9 Lower shear jaw 10 Chin – keep top edge built up, maintain radiuses in … Grease all locations until grease extrusion is visible with jaw open and closed. 8-HOUR CHECKLIST Inspect: • Bolts - …

… 15 PARTS ORDER POLICY AND PROCEDURE 16 PARTS ORDER FORM 17 INDEX 18 CONTACT INFORMATION 20 © 2019 Genesis Attachments, … 2019 Genesis Attachments, LLCGenesis GBC Bucket Crusher18 INDEX 34-0900408015 Cap Screw 5 34-0900410020 Cap Screw 5 …

… the end cap, tie rod and tie rod nut 9 Lower shear jaw 10 Chin plate – keep top edge built up, maintain radiuses … plate and blade when setting/adjusting blade gap. 15 Upper shear jaw – never shim blades in upper jaw 16 … Requires build-up and hard-surfacing to keep it even with the front face of the piercing tip. 19 Piercing tip …

… Rev. K *Weight includes mounting bracket and stiff arm. **Jaw opening varies slightly depending on excavator mounting … warranty. Genesis reserves the right to continually make product improvements designed to positively enhance … 30 957 1.1 - 1.9 2,134 203 533 889 11 - 14 GSD 40 1,188 1.5 - 2.3 2,337 229 660 965 14 - 18 GSD 50 1,497 2.3 - 3.1 …

… genesisattachments.com Model Capacity Weight* Jaw Open Width (A) Jaw Open Height (B) Jaw Closed Width (C) … 39 47 23 11,000 - 20,000 GHG 14 0.4 1,415 71 46 44.5 52 28 15,000 - 31,000 GHG 16 0.6 1,930 73 49 48 54 34 22,000 - … 2 10 9 1 3 4 5 7 8 11 6 Oversized main pins combined with wear bushings and sealed with O-rings Powerful hydraulic …

… genesisattachments.com Model Capacity Weight* Jaw Open Width (A) Jaw Open Height (B) Jaw Closed Width (C) … (mt) GHG 4 0.09 172 1,143 838 711 902 457 2 - 4 GHG 6 0.15 290 1,346 1,041 864 1,118 508 4 - 6 GHG 9 0.18 449 1,626 … the SSAB group of companies. Oversized main pins combined with wear bushings and sealed with O-rings Powerful hydraulic …

… is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed … procedure in Safety & Operator’s Manual If speed is good with low power, internal seals on logix cartridge may need to … contact the Genesis Service Department for procedures Slow jaw open with low power Pilot check valves in regen valve may …

… is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed … in Safety, Operator’s and Parts Manual If speed is good with low power, internal seals on logix cartridge may need to … contact the Genesis Service Department for procedures Slow jaw open with low power Pilot check valves in regen valve may …

… is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed … Use a new blade to help determine build-up height for the jaw. Build up the jaw to slightly higher than the original parent material profile with E7018. Apply single passes in each line with the grain …

… is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed … procedure in Safety & Operator’s Manual If speed is good with low power, internal seals on logix cartridge may need to … contact the Genesis Service Department for procedures Slow jaw open with low power Pilot check valves in the regen valve …

… is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed … in Safety, Operator’s and Parts Manual If speed is good with low power, internal seals on logix cartridge may need to … contact the Genesis Service Department for procedures Slow jaw open with low power Pilot check valves in the regen valve …

… is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed … Use a new blade to help determine build-up height for the jaw. Build up the jaw to slightly higher than the original parent material profile with E7018. Apply single passes in each line with the grain …

… is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed … and other abnormalities. Blade condition, blade gaps and Jaw Armor also need to be inspected. Wear parts kit fastener … any functions of the carrier while cutting or crushing with your Genesis attachment, including boom and drive …

… of blade edges at the end of each day to prevent upper jaw deflection, excessive blade wear and undue stress to … into the through-hole on the lower jaw. Tap the drift pin with a hammer until the blade is loose. � Carefully remove … is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed …

… of blade edges at the end of each day to prevent upper jaw deflection, excessive blade wear and undue stress to … into the through-hole on the lower jaw. Tap the drift pin with a hammer until the blade is loose. � Carefully remove … is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed …